products

Fume Hoods And Chambers

Aerodynamic Fume Hood /Chamber (Wood)

Fume Hood in Marine Laminated plywood , Polyglass Lining with FRP Base inside Reaction Chamber : Length: 1800mm Deep: 900mm : H:2600 mm.. 2 nos. Connected with Polypropylene Ducting for common Exhaust Blower ,Apparatus Holding Greed ,Polypropylene Cup Sink with drain Piipe including Aiir,Vaccum,Water Taps ,Electrical 10/20 Amps. Power Plugs and sockets, LED/Tubelight Inside hood with on-off switch.
Base : Granite top fixed on MarinePly with Storage Unit.

Walk In Fume Chamber with Polyglass lining inside Reaction Chamber(Wooden)

Fume Hood in Marine Laminated plywood with PP Lining with FRP Base on side walls : Length: 2000mm Deep: 900mm : H:2600 mm.. 2 nos. Connected with Polypropylene Ducting for common Exhaust Blower ,Apparatus Holding Greed ,Polypropylene Cup Sink with drain Piipe including Aiir,Vaccum,Water Taps ,Electrical 6/16 Amps. Power Plugs and sockets, LED/Tubelight Inside hood with on-off switch.
. Base : Granite top fixed on MarinePly with Storage Unit.

Mild Steel Fume Hood

Fume Hood in metal:Length: 2400mm Deep: 900mm : H:1800 mm.. Connected with Polypropylene Ducting to Exhaust Blower ,,Polypropylene Cup Sink with drain Piipe including Aiir,Vaccum,Water Taps ,Electrical 6/16 Amps. Power Plugs and sockets, LED/Tubelight Inside hood with on-off switch. Granite Base top.

Laboratory Wall Bench /Instrument Wall Table

Instrument Wall Table in Mild Steel

LABORATORY INSTRUMENT WALL Table in Mild Steel with Granite Top UNDERBENCH UNITS in Mild Steel Length:3000 mm Deep ; 750 mm, Height: 860mm Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm.

Laboratory Instrument Wall Bench (Wooden)

LABORATORY INSTRUMENT WALL BENCH with Granite Top ,Mild Steel Base Frame UNDERBENCH Storage Units (Wooden) Length : 6000 mm Deep:750 mm, Height: 860mm Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm

Laboratory Wall Bench with Reagent Rack

LABORATORY WALL BENCH with Reagent Rack ,Granite Top ,Mild Steel Base Frame UNDERBENCH Storage Units (Wooden): Length: 1800mm Deep ; 750 mm, Height: 860mm Length available in ..1500/1800/2400/3000/3600/
4800/6000mm

Wall Bench Standard and Low Height with Apparatus Holding Greed

LABORATORY WALL BENCH with Granite Top,Mild Steel Base Frame Storage UNDERBENCH UNITS in wood including Mild Steel Apparatus Holding Greed Sink Unit with 3 way Swan nake Water Tap Deep ; 750 mm, Height: 860mm and 450mm Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm

Wall Bench in Mild Steel with Electrical Trunking

LABORATORY WALL BENCH in Mild Steel with Electrical Truncking with Granite Top and Storage UNDERBENCH UNITS in Epoxy Coated Mild Steel materials Length : 4200 mm Deep ; 750 mm, Height: 860mm Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm

Laboratory Wall Bench with Reagent Rack (Wooden)

LABORATORY WALL BENCH with Reagent Rack (Wooden) , Granite Top, MS Base Frame UNDERBENCH Storage UNITS(Wooden): Length: 3600 mm Deep ; 750 mm, Height: 860mm Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm

LABORATORY CENTRE TABLE with Reagent Rack (Wooden )

LABORATORY CENTRE TABLE with Reagent Rack (Wooden ), Mild Steel Base Frame including Polypropylene Sink,Single Water Tap ,Gas Tap,Stainless Steel Sink Unit with 3way swan nake Water Tap Granite Top , Underbench Storage Units (wooden)Length :4800 mm Deep ; 1500 mm, Height: 860mm Length available in ..4800/6000mm

LABORATORY CENTRE TABLE Mild Steel

LABORATORY CENTRE TABLE Mild Steel Apparatus Holding Greed, Mild Steel Base Frame including Polypropylene Sink,Single Water Tap ,Gas Tap, Granite Top , Underbench Storage Units (wooden) Length :3600 mm Deep ; 1500 mm, Height: 860mm and Wooden Reagent Storage Rack Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm

Reagent Rack

LABORATORY Wall TABLE with Reagent Rack in Mild Steel with Base Frame including Granite Top , Underbench Storage Units in Mild Steel Length :2700 mm Deep ; 1500 mm, Height: 860mm Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm

Laboratory Tables

LABORATORY CENTRE TABLE in Mild Steel Reagent Rack with Electrical Power Points , Mild Steel Base Frame including Stainless Steelo Sink,3 way Swannake Water Tap , Granite Top , Underbench Storage Units in Mild Steel Length :3000 mm Deep ; 1500 mm, Height: 860mm Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm

LABORATORY CENTRE TABLE Mild Steel Apparatus Holding Greed, Mild Steel Base Frame having Standard & Low Height Platform ,Stainless Steel Sink , Water Tap ,Gas Tap, Granite Top , Electrical Points Wooden Reagent Storage Rack, Writing Unit of size W:1500mm D:750mmH:750mm-1 No. Underbench Storage Units (wooden) Length :6000 mm Deep ; 1500 mm, Height: 860mm Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm

Wall Bench in Mild Steel with Electrical Trunking

LABORATORY WALL BENCH in Mild Steel with Electrical Truncking with Granite Top and Storage UNDERBENCH UNITS in Epoxy Coated Mild Steel materials Length : 4200 mm Deep ; 750 mm, Height: 860mm Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm

Instrument Table in Mild Steel

LABORATORY Instrument Table in Mild Steel with Granite Top UNDERBENCH Storage Units in Epoxy Coated Mild Steel sheets Length : 3000 mm Deep ; 750 mm, Height: 860mm Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm

Centre and Wall Bench in Mild Steel with Electrical Trunking

1 ) LABORATORY CENTRE TABLE in Mild Steel with Electrical Power Points , Mild Steel Base Frame including Stainless Steelo Sink,3 way Swan nake Water Tap , Granite Top , Underbench Storage Units in Mild Steel Length :4200 mm Deep ; 1500 mm, Height: 860mm
2 ) LABORATORY WALL BENCH in Mild Steel with Electrical Truncking with Granite Top and Storage UNDERBENCH Storage Units in Epoxy Coated Mild Steel materials Length : 4200 mm Deep ; 750 mm, Height: 860mm Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm

Laboratory Wall Bench with Reagent Rack (Wooden)

LABORATORY WALL BENCH with Reagent Rack (Wooden) "U"Type Granite Top, MS Base Frame UNDERBENCH Storage UNITS(Wooden): "U" Type -Length: 3600mm +5100 mm +3600mm Deep ; 750 mm, Height: 860mm Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm

Centre Table for Instruments with Underbench Storage Units (Wooden)

CENTRE TABLE for Instruments (Wooden) , Granite Top, MS Base Frame UNDERBENCH Storage UNITS(Wooden), Centre Table Length: 3000 mm Deep ; 1500 mm, Height: 860mm Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm

Laboratory Wall Bench (Wooden)

LABORATORY WALL BENCH (Wooden) , Granite Top, MS Base Frame - 2 nos UNDERBENCH Storage UNITS(Wooden): Length: 8000 mm Deep ; 750 mm, Height: 860mm Length available in ..
1500/1800/2400/3000/3600/
4800/6000mm

Spot Extractor Arms

Laboratory Spot Extractor Arm

Ceiling Mounted 3 Joint Reach 795mm (75mm) Make: SES Indian Make, Polypropylene Hood 385 mm dia , celing mounted bracket in mild steel epoxy coated , Connected to polypropylene ducting and Exhaust System for Removing Gases from room location.

Exhaust Blowers

Centrifugal Exhaust Blower with Ducting

Capacity : 2000 CFM Capacity
Casing : Fibre Glass Reinforced coated Polyglass sheet casing installed on Mild steel angle frame with mild steel sheet base for motor
Motor : Crompton Greaves Ltd. Make 2 H.P. 1440 RPM 3 Phase
Impeller :Single Piece Injection Moulded Polypropylene Impleller duly Balanced attached to motor shaft.
Outlet Ducting : Outlet made of Fibre Glass Reinforced coated Polyglass sheet Duct with flange ,reducer,Canopy fixed on topof exhaust blower casing. Polypropylene Ducting : Polypropylene Ducting of 200mm/250mm/300mm diameter round made out of 3 mm thk. Sheet. Reducers,bends,tees are parts of ducting,,as per site requirements.used inside Laboratory Interior Area.,
Fibre Glass Reinforced (FRP) coated Polyglass of 3mm thk. Sheet for Ducting made of 200mm/250mm/300mm/
350mm/400mm etc. with reducers ,bends, tees ,are parts of ducting, as per site requirements used for outerside /exterior exposed to sunlight side.

Centrifugal Exhaust Blower with Ducting

Capacity : 2000 CFM Capacity Casing : Fibre Glass Reinforced coated Polyglass sheet casing installed on Mild steel angle frame with mild steel sheet base for motor
Motor : Crompton Greaves Ltd. Make 2 H.P. 1440 RPM 3 Phase - 6 nos.
Impeller : Single Piece Injection Moulded Polypropylene Impleller duly Balanced attached to motor shaft.
Outlet Ducting : Outlet made of Fibre Glass Reinforced coated Polyglass sheet Duct with flange ,reducer,Canopy fixed on topof exhaust blower casing.
Polypropylene Ducting : Polypropylene Ducting of 200mm/250mm/300mm diameter round made out of 3 mm thk. Sheet. Reducers,bends,tees are parts of ducting,,as per site requirements.used inside Laboratory Interior Area.,
Fibre Glass Reinforced (FRP) coated Polyglass of 3mm thk. Sheet for Ducting made of 200mm/250mm/300mm/
350mm/400mm etc. with reducers ,bends, tees ,are parts of ducting, as per site requirements used for outerside /exterior exposed to sunlight side.
Available : Centrifugal EXHAUST BLOWER in following capacity

  • 500 CFM Capacity Blower ..with 0.5 HP Motor 3 Phase 1440 RPM
  • 800 CFM Capacity Blower ..with 1 HP Motor 3 Phase 1440 RPM
  • 1000 CFM Capacity Blower ..with 1 HP Motor 3 Phase 1440 RPM
  • 1200 CFM Capacity Blower ..with 1.5 HP Motor 3 Phase 1440 RPM
  • 1500 CFM Capacity Blower ..with 2 HP Motor 3 Phase 1440 RPM
  • 2000 CFM Capacity Blower ..with 2 HP Motor 3 Phase 1440 RPM
  • 2200 CFM Capacity Blower ..with 3 HP Motor 3 Phase 1440 RPM
  • 2700 CFM Capacity Blower ..with 3 HP Motor 3 Phase 1440 RPM
  • 4000 CFM Capacity Blower ..with 5 HP Motor 3 Phase 1440 RPM

Centrifugal Exhaust Blower with Ducting

Capacity : 3000 CFM Capacity
Casing : Fibre Glass Reinforced coated Polyglass sheet casing installed on Mild steel angle frame with mild steel sheet base for motor
Motor : Crompton Greaves Ltd. Make 3 H.P. 1440 RPM 3 Phase - 6 nos.
Impeller : Single Piece Injection Moulded Polypropylene Impleller duly Balanced attached to motor shaft.
Outlet Ducting : Outlet made of Fibre Glass Reinforced coated Polyglass sheet Duct with flange ,reducer,Canopy fixed on topof exhaust blower casing.
Polypropylene Ducting : Polypropylene Ducting of 200mm/250mm/300mm diameter round made out of 3 mm thk. Sheet. Reducers,bends,tees are parts of ducting,,as per site requirements.used inside Laboratory Interior Area.,
Fibre Glass Reinforced (FRP) coated Polyglass of 3mm thk. Sheet for Ducting made of 200mm/250mm/300mm/
350mm/400mm etc. with reducers ,bends, tees ,are parts of ducting, as per site requirements used for outerside /exterior exposed to sunlight side.
Available :
Centrifugal EXHAUST BLOWER in following capacity

  • 500 CFM Capacity Blower ..with 0.5 HP Motor 3 Phase 1440 RPM
  • 800 CFM Capacity Blower ..with 1 HP Motor 3 Phase 1440 RPM
  • 1000 CFM Capacity Blower ..with 1 HP Motor 3 Phase 1440 RPM
  • 1200 CFM Capacity Blower ..with 1.5 HP Motor 3 Phase 1440 RPM
  • 1500 CFM Capacity Blower ..with 2 HP Motor 3 Phase 1440 RPM
  • 2000 CFM Capacity Blower ..with 2 HP Motor 3 Phase 1440 RPM
  • 2200 CFM Capacity Blower ..with 3 HP Motor 3 Phase 1440 RPM
  • 2700 CFM Capacity Blower ..with 3 HP Motor 3 Phase 1440 RPM
  • 4000 CFM Capacity Blower ..with 5 HP Motor 3 Phase 1440 RPM

Centrifugal Exhaust Blower with Ducting

Capacity : 1000 CFM Capacity
Casing : Fibre Glass Reinforced coated Polyglass sheet casing installed on Mild steel angle frame with mild steel sheet base for motor
Motor : Crompton Greaves Ltd. Make 1 H.P. 1440 RPM 3 Phase
Impeller : Single Piece Injection Moulded Polypropylene Impleller duly Balanced attached to motor shaft.
Outlet Ducting : Outlet made of Fibre Glass Reinforced coated Polyglass sheet Duct with flange ,reducer,Canopy fixed on topof exhaust blower casing.
Polypropylene Ducting : Polypropylene Ducting of 200mm/250mm/300mm diameter round made out of 3 mm thk. Sheet. Reducers,bends,tees are parts of ducting,,as per site requirements.used inside Laboratory Interior Area.,
Fibre Glass Reinforced (FRP) coated Polyglass of 3mm thk. Sheet for Ducting made of 200mm/250mm/300mm/350mm/400mm etc. with reducers ,bends, tees ,are parts of ducting, as per site requirements used for outerside /exterior exposed to sunlight side.

Under Bench Storage Units

Under Bench Storage Units

Made out of Mild Steel Epoxy coated Underbench Storage Units Available in Length :400mm/450mm/600mm/750mm/900mm asper requirements with Drawer unit,2 small shutters with Stainless steel handles,Godrej multipurpose locks. ,shelf inside . Tubular pipebase frame with levelers.

Laboratory Balance Bench

Laboratory Mild Steel Balance Bench

Having Mild Steel Outer frame duly epoxy coated with Inside Tubular frame with rubber adjustable bolts.
To minimize vibrations transmitted to Granite Top,rubber sheet blocks are Used.
Length : 900 mm Deep :600 mm H:860mm
Available in Length : 1200mm long Deep:600mm H: 750mm/H: 860mm

Laboratory Mild Steel Balance Bench

Having Mild Steel Outer frame duly epoxy coated with Inside Tubular frame with rubber adjustable bolts.
To minimize vibrations transmitted to Granite Top,rubber sheet blocks are Used.
Length : 1500 mm Deep :750 mm H:860mm
Available in Length : 1200mm long Deep:600mm H: 750mm/H: 860mm as per requirements

Chemical Storage Racks

Chemical Storage Racks

With the assistance of our vast experience, we are extremely proficient in manufacturing & supplying superlative quality of Chemical Storage Racks. Our storage racks are manufactured using elevated quality basic material and best techniques under the direction of professionals. We offer these storage racks in several specifications as per our customer’s preferences. In addition, these storage racks are inspected on several parameters so as to dispatch a flawless range from our end.

Contact Us

B-22/1-2,Sector 3
Himgiri CHS,Sanpada(E)
navi Mumbai-400705
mobile: 09322660316
Email:pradeepmokashi47@gmail.com
plm6163@yahoo.co.in

PUNE OFFICE

Block 'C'/A/1/5, Telco Road, Near IBMR College, Bharat Gas Lane, Chinchwad Station, Near ACPL Godown, Pune -411 019 Email:sales@tejasenterprises.in
pradeep@tejasenterprises.in